Free Printable Rifle Sight-In Targets (MOA & MIL, 25–200 Yards)

Free printable rifle sight-in targets with grids scaled to distance. Download one PDF with eight letter-size targets: MOA and MIL versions for 25, 50, 100 and 200 yards. On every target, one square equals one click-friendly unit of angle (1 MOA or 0.1 MIL) at that distance. You count the squares between your group and the aiming point, multiply by your clicks per square, and dial. There's no inch-to-MOA math at the bench.

What's in the Free Sight-In Target Pack

Every page also has a high-visibility orange aiming diamond that's sized for its distance, bold reference lines for faster counting, a correction guide, a log for date, rifle, ammo, scope and clicks, and a 1-inch bar so you can confirm the page printed at the correct scale.

Do You Need Different Size Squares for Different Distances?

Yes, if you want the grid to tell you your scope adjustment directly. Scope clicks are angular. A 1/4 MOA click moves the point of impact about 0.26″ at 100 yards, but only about 0.065″ at 25 yards and about 0.52″ at 200 yards. A fixed 1-inch grid means converting inches to MOA every time you shoot at a new distance. A grid scaled to the distance keeps one square equal to the same angle at every range. Counting squares gives you the correction.

That's why this pack has a separate target for each yardage. If you have a 1/4 MOA scope, one square is always 4 clicks, whether you're at 25 yards or 200.

How to Use These Targets to Sight In a Rifle

1. Print at actual size. Set your printer to 100% / Actual Size and check the 1-inch bar with a ruler. If it doesn't measure exactly 1 inch, the grid won't match your clicks.
2. Pick the right target. Use the MOA set if your turrets are marked in MOA. Use the MIL set if they're marked MRAD or MIL. Then match the target to the distance you're shooting.
3. Start close. Hang the 25-yard target and fire a three-shot group from a stable rest, aiming at the center of the orange diamond.
4. Count squares to the center of the group. Count from the center of the group, not your best shot, to the aiming point. Count vertical and horizontal separately.
5. Dial the correction. Multiply the squares by your clicks per square: 4 clicks for a 1/4 MOA scope, 8 for a 1/8 MOA scope, 1 for a 0.1 MIL scope. If the group is low, dial up. If it's left, dial right.
6. Confirm and stretch out. Fire a confirmation group, then move to the 100-yard target and repeat the count-and-dial process to fine-tune your zero. Finish with a group of the exact ammo you'll hunt with.
7. Log it. Write your clicks, ammo and conditions in the log box so next season you're confirming a zero, not starting over.

MOA vs. MIL Targets: Which Should You Print?

Print the version that matches your scope's turrets. On the MOA targets, one square equals 1 MOA, with bold lines every 5 MOA. Most hunting scopes sold in the U.S. use 1/4 MOA clicks, so each square is 4 clicks. On the MIL targets, one square equals 0.1 MIL, which is one click on a standard MRAD scope, with heavier lines every 0.5 and 1.0 MIL. Mixing units is the most common sight-in mistake. A MIL scope on an MOA grid gives you corrections that are wrong by roughly a factor of three.

Some older or budget scopes use “inch-per-hundred-yards” (IPHY) clicks instead of true MOA. One IPHY is exactly 1 inch at 100 yards instead of 1.047 inches. The MOA targets still work fine for a sight-in with those scopes.

Tips for Getting a Hunting Zero Without Wasting Ammo

• Bore sight first. A laser bore sighter gets your first shot on paper and can save a full box of ammo.
• Correct from groups, not single shots. Three-shot groups average out flyers and wind.
• Let the barrel cool. Hunting-weight barrels shift point of impact as they heat up.
• Confirm with your hunting load. Practice ammo and premium hunting ammo often hit in different places.

Want the full walkthrough? Read Sighting In Your Rifle Without Blowing Your Ammo Budget. Then use our Bullet Rise / Drop Calculator to see where your bullet will hit past your zero.

Frequently Asked Questions

Are these rifle sight-in targets really free?

Yes. The PDF is free to download and print as many times as you like for personal use. There's no sign-up required.

What size paper do the targets print on?

Each target fits on standard US Letter paper (8.5″ × 11″). The grid is exactly 7.5 inches wide edge to edge. Print at 100% / Actual Size.

How many clicks is one square?

On the MOA targets, one square is 1 MOA: 4 clicks on a 1/4 MOA scope or 8 clicks on a 1/8 MOA scope. On the MIL targets, one square is 0.1 MIL, which is 1 click on a standard 0.1 MRAD scope. This holds at every distance in the pack.

What distance should I sight in my hunting rifle at?

Most hunters get on paper at 25 yards, then set their final zero at 100 yards. That's a practical zero for most whitetail ranges. If you regularly shoot past 250 yards, a 200-yard zero flattens your trajectory across typical hunting distances.

Is 1 MOA exactly 1 inch at 100 yards?

No. 1 MOA is 1.047 inches at 100 yards. The difference is small up close but adds up with distance, which is why these targets use true MOA scaling for each yardage.

Can I use these targets with iron sights or a red dot?

Yes. The grid still shows how far your group is from the aiming point. Your sight's adjustment value may differ from a scope's, so check your sight's manual for how far one click moves the point of impact.

Always follow safe firearm handling practices and your range's rules. Treat every firearm as if it's loaded.